For emergency chemical information, please view the SDS for the chemical or call:
For all other emergency information, please contact us toll free at:
Keep a wide variety of surfaces clean and fresh with these Noble Chemical QuikPacks 1.5 oz. heavy duty cleaner and degreaser water soluble packets! This cleaner comes in convenient, high...
Item #: 149FF2
Noble Chemical's Sierra Acrylic Floor Finish is a metal cross-linked finish, with high initial gloss and durability with exceptional responsiveness to spray buffing. A true workhorse in any maintenance program, this floor finish will get your floors looking great.
Preparation: If stripping is necessary, use a high quality product and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow to dry completely.
Finishing: Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 30 minutes before applying the next coat. Two or three coats are desired initially, depending on the condition of the floor and gloss desired.
Maintenance: The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.