For emergency chemical information, please view the SDS for the chemical or call:
For all other emergency information, please contact us toll free at:
Keep a wide variety of surfaces clean and fresh with these Noble Chemical QuikPacks 3.5 gram extra strength cleaner water soluble packets! This concentrated cleaner comes in individual p...
Item #: 149FF3
Noble Chemical's Sierra Fast Drying Floor Finish is an easy to use finish designed for high traffic areas where high gloss and durability are critical, like supermarkets and department stores. It's an excellent product for damp mopping and spray buffing with any speed buffing machine. This fast drying floor finish is suitable for use on vinyl tile, vinyl asbestos, asphalt tile, linoleum, rubber tile, terrazzo, sealed wood, and quarry tile.
If stripping is necessary, use a high quality stripper and follow directions accordingly. If floor is in good condition and stripping is not necessary, sweep up excess dirt and dust and then clean with a good quality cleaner to remove dirt and oils. Follow with a thorough rinsing and allow to dry completely.
If floor was stripped, use a good acrylic sealer to further prepare the floor for finishing. Spread a liberal coat of finish evenly across the floor with a clean mop or applicator. Allow each coat to dry at least 45 minutes before applying the next coat. Two or three coats are desired initially, depending on the condition of the floor and gloss desired.
The floor may be maintained using a quality floor cleaner and damp mopping regularly. Spray buffing or mop-on restoring may also be done after sweeping up loose dirt and dust. Follow directions for each product accordingly.
This product meets the maximum content requirements for Volatile Organic Compounds (VOCs) as established by state and Federal regulations.