For emergency chemical information, please view the SDS for the chemical or call:
For all other emergency information, please contact us toll free at:
Keep a wide variety of surfaces clean and fresh with these Noble Chemical QuikPacks 3.5 gram extra strength cleaner water soluble packets! This concentrated cleaner comes in individual p...
Item #: 149FC4
Noble Chemical's Step & Shine is a totally synthetic floor cleaner that naturally enhances the beauty of your floors in one simple step! Although it has a slightly acidic pH, it will not damage the gloss or film of any finish, and effectively neutralizes harsh cleaner residue left behind from previous use.
Step & Shine is low foaming, so it's great for use in automatic scrubbers. It dissolves all ice melt and hard water films, and will never leave a soapy haze.
Step & Shine is suitable for use on vinyl tile, vinyl, asbestos, linoleum, rubber tile, concrete, flagstone brick, terrazzo, and sealed wood.
Directions for Use:
Dilute according to conditions of floor as listed below. Dip mop into solution and wring out thoroughly. Mop floor in usual fashion, re-soaking mop and wringing regularly. If solution in bucket becomes dirty, discard and make up fresh solution. Rinsing is not required after use.
General Floor Cleaning: Dilute 1-2 ounces of concentrate per gallon of warm water.
Heavy Duty Floor Cleaning: Dilute 2-4 ounces of concentrate per gallon of warm water.
Automatic Floor Scrubbers: Dilute 1-2 ounces of concentrate per gallon of warm water.
As Mopping Solution Additive: Add 2 to 3 ounces of concentrate per gallon of rinse water. Waxed or finished floors will be noticeably cleaner and produce more gloss. Will effectively remove ice melt residue.
After Stripping Conditioner: Dilute 16 ounces of concentrate per gallon of water and mop on floor. Pick-up with a wet/dry vac or mop. Allow floor to dry and commence to apply finish.
